Delta 23-198 Instruction Manual download pdf (Page 4)

13. Form a habit of checking to see that all extra

equipment such as adjusting keys, wrenches,

scrap, stock, and cleaning rags are removed away

from the machine before turning on.

14. Keep safety guards in place at all times when the

machine is in use. If removed for maintenance

purposes, use extreme caution and replace the

guards immediately when maintenance is complete.

15. Make sure the tool is firmly secured to a stable work

surface before use.

16. Check damaged parts. Before further use of the

machine, a guard or other part that is damaged

should be carefully checked to determine that it will

operate properly and perform its intended function.

Check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting and

any other conditions that may affect its operation.

A guard or other part that is damaged should be

properly repaired or replaced.

17. Provide for adequate space surrounding work area

and non-glare, overhead lighting.

18. Keep the floor around the machine clean and free of

scrap material, oil and grease.

19. Keep visitors a safe distance from the work area.

Keep children away.

20. Make your workshop child proof with padlocks,

master switches or by removing starter keys.

21. Give your work undivided attention. Looking

around, carrying on a conversation and “horse-

play" are careless acts that can result in serious

injury.

22. Maintain a balanced stance at all times so that you

do not fall or lean against the tool or its moving

parts. Do not overreach or use excessive force to

perform any machine operation.

23. Use the right tool at the correct speed and feed

rate. Do not force a tool or attachment to do a job

for which it was not designed. The right tool will do

the job better and safer.

24. Use recommended accessories; improper

accessories may be hazardous.

25. Maintain machinery with care. Follow instructions

for lubricating and changing accessories.

26. Turn off the machine before cleaning. Use a brush

or compressed air to remove dust or debris — do

not use your hands.

27. Do not stand on the machine. Serious injury could

occur if the machine tips over.

28. Never leave the machine running unattended. Turn

the power off and do not leave the machine until it

comes to a complete stop.

29. At all times, hold the stock firmly.

30. Do not use this tool for other than it intended use. If

used for other purposes, DELTA

Power Equipment

Corporation disclaims any real or implied warranty

and holds itself harmless for any injury or damage

which may result from that use.

Familiarize yourself with the following safety notices

used in this manual:

This means that if precautions are not heeded, it may

result in minor injury and/or possible machine damage.

This means that if precautions are not heeded, it may

result in serious injury or possibly even death.

ADDITIONAL SPECIFIC SAFETY RULES

1. DO NOT operate this machine until it is completely

assembled and installed according to the

instructions. A machine incorrectly assembled can

cause serious injury.

2. OBTAIN ADVICE from your supervisor, instructor, or

another qualified person if you are not thoroughly

familiar with the operation of this machine.

Knowledge is safety.

3. FOLLOW ALL WIRING CODES and recommended

electrical connections to prevent shock or

electrocution.

4. ALWAYS USE THE PROVIDED BLOTTER and

wheel flanges to mount the grinding wheels on

the grinder shaft to prevent wheel damage or

accidental separation. Separation can result in

fragments flying off the wheel at high speeds.

5. USE ONLY WHEELS suitable for the speed of the

machine. Unsuitable grinding wheels can come

apart, throwing fragments out at high speeds.

6. USE ONLY WHEELS that have a bore exactly

equal to the arbors of the machine. Never attempt

to machine an undersized wheel to fit an arbor.

Unsuitable grinding wheels can come apart,

throwing fragments out at high speeds.

7. DO NOT overtighten wheel nut.

8. DO NOT USE A WHEEL THAT VIBRATES. Dress

the grinding wheel, replace it, or replace the

bearings of the shaft. Unsuitable grinding wheels

can come apart, throwing fragments at high

speeds.

9. INSPECT WHEELS before starting the machine

for cracks or fragments. REPLACE DAMAGED

WHEELS immediately. Parts of the wheel can be

thrown at high speeds causing serious injury.

10. ADJUST EYE SHIELDS close to the grinding

wheel, and re-adjust as the wheel wears down.

Flying sparks are dangerous and can cause fires or

explosions.

Failure to follow these rules may result in serious personal injury.

15. Make sure the tool is firmly secured to a stable work

surface before use.

1 2 3 4 5 6 7 8 9 ... 43 44

Comments to this Manuals

No comments

Delta 23-198 Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Straight grinders Delta 23-198