DELTA LTL2000 Retrometer 6
Communication
Use a simple terminal or PC with communication software to control the LTL2000. (Windows Hyper
Terminal will do fine.)
Serial communication setup (RS232 interface):
9600 baud, No parity, 8 bit, 1 stop
Xon/Xoff handshake
Selected commands
?<CR> (Help): LTL2000 will return command set
LR<CR> (Log dump): Date, time, Rl, status, mode.
LT<CR> (Test log dump): Date, time, Rl, lamp on/off, idle, load, status, mode.
RL<CR> (Rl measurement): Rl, date, time, status code, system info.
RT<CR> (Test measurement): Rl, date, time, status code, extended system info.
SD<CR> (Status dump): Instrument status.
Remember:
§ Recharge battery when possibel. Never leave battery discharged for longer
periods of time.
§ Keep protection window, light trap and calibration unit clean.
§ LTL2000 is an optical precision instrument, handle with care.
§ Store in clean and dry environment.
Comments to this Manuals