DELTA LTL2000 Retrometer 14
Zero Printout
The printout after a Zero measurement showing the measured Zero Signal in % of the nominal signal, if
the zero signal is within a specified limit OK is printed, if the zero signal becomes high a warning is
printed. A T# number showing the number of measurements in the Test log and the date and time for
the measurement, The Zero printout can only follow after a measurement performed with the <2'nd>
+ <ZERO> key.
Calibration Printout
The printout after a Calibration measurement showing the selected Rl Normal value. A T# number
showing the number of measurements in the Test log and the date and time for the calibration. The
Calibration printout can only follow after a measurement performed with the <CALIB> key.
Comments to this Manuals