Delta LTL2000S Specifications download pdf (Page 45)

DELTA LTL2000 Retrometer 39

APPENDIX B

Special Status Printouts.

The LTL2000 can print a special status at power up showing all internal settings and values generated

by the different functions.

The status printout is activated by holding the keys <2'nd> and <PRINT> activated during power up.

Once the print process has started release all keys and wait for the completion. The print process can

only be turned off with the <OFF> key.

The following sequence of measurements and printouts was done to show the kind of information the

user can get under different conditions. First the instrument was reset with the II function and the data

and the test log was cleared. Then a Zero measurement was done followed by a calibration, and a

normal Rl measurement was taken, and finally a test measurement was executed. The instrument status

was printed after each step using the described procedure.

The purpose of this Special Status Printout is to give the user an easy way to communicate the instrument

status to a technician in case of problems.

A similar Status can be generated with the DPP command.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 54 55

No comments

Delta LTL2000S Specifications Page 45