Delta LTL2000S Specifications download pdf (Page 47)

DELTA LTL2000 Retrometer 41

Status after first Zero

After executing a ZERO function the status will look

like this.

It shows that the Zero measurement has been

executed and when this was done.

No calibration has been done yet.

The values recorded during the zero measurement,

the system leak, the dark signal and the offset signal

are listed.

The voltage conditions during the zero measurement

are shown:

Battery voltage measured when the lamp is on, the

voltage with the lamp off and finally the PMT voltage:

It can be seen that the data from the zero measure-

ment went into the Test Log.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53 54 55

No comments

Delta LTL2000S Specifications Page 47