Delta 16" BENCH GRINDERS 23-640 User Manual

INSTRUCTION MANUAL6" Bench Grinders(Model 23-640 & 23-645)PART NO. 900464 (011)Copyright © 2001 Delta MachineryESPAÑOL: PÁGINA 11To learn mor

10PARTS, SERVICE OR WARRANTY ASSISTANCEAll Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of

2SAFETY RULESWoodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain hazards in

3ADDITIONAL SAFETY RULES FOR GRINDERS1. DO NOT OPERATE your tool until it is completelyassembled and installed according to the instructions.2. IF YOU

4UNPACKING AND CLEANINGCarefully unpack the tool and all loose items from the carton. Remove the protective coating from all unpainted parts.This coat

5HARDWARE ILLUSTRATIONHardware Illustrated in actual sizeFig. 211/16" Flat Washer (2)3/4" Flat Washer (4)5/16 - 18 x 1/2" Hex Head Scre

6Fig. 3ASSEMBLYASSEMBLING TOOL RESTS1. Assemble the v-grooved tool rest (A) Fig. 3, to theinside of the right wheel guard using two 5/16-18x5/8"h

7Fig. 72. Insert the short end of mounting rod (F) Fig. 7, intohole of frame (B) and fasten in place with 1/4-20x3/4"carriage head screw (G), 5/1

8EXTENSION CORDSUse proper extension cords. Make sure your extensioncord is in good condition and is a 3-wire extension cordwhich has a 3-prong ground

9Fig. 14STARTING ANDSTOPPING GRINDERThe switch (A) Fig. 14, is located on the front of thegrinder. To turn the grinder “ON” push the left handportion