Delta SM600 User Manual download pdf (Page 14)

Fig. 30

Fig. 31

TILTING THE TABLE

The table on your scroll saw can be tilted 45 degrees to

the left for bevel cutting operations by loosening table

lock handle (A) Fig. 30, tilt the table to the desired angle

and tighten lock handle (A).

When bevel cutting, the holddown (B) Fig. 31, can be

adjusted to lay flat on the stock by loosening screw (C)

and tilting the holddown (B) accordingly. Then tighten

screw (C).

ADJUSTING THE TABLE

Fig. 32

Fig. 33

1. Loosen the table locking handle, and move the table

all the way to the right.

2. Using a square (A) Fig. 32, check to see if the table

is 90 degrees to the saw blade, as shown.

3. If the table is not at 90 degrees to the blade, adjust

the table accordingly making certain screw (B) Fig. 33,

contacts bottom of table surface when table is 90

degrees to the blade. Screw (B) can be adjusted by

loosening nut (C), thread screw (B) in or out the desired

distance and tighten nut (C).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

Delta SM600 User Manual Page 14