Delta SM600 User Manual Page 5
- Page / 60
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
WARNING: Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire
extension cord which has a 3-prong grounding type plug and matching receptacle which will accept the machine’s plug.
When using an extension cord, be sure to use one heavy enough to carry the current of the machine. An undersized
cord will cause a drop in line voltage, resulting in loss of power and overheating. Fig. C, shows the correct gauge to use
depending on the cord length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the
cord.
EXTENSION CORDS
OPERATING INSTRUCTIONS
FOREWORD
ShopMaster Model SM600 is a 16" variable speed scroll saw. The variable speed range for the Model SM600 is 400-
1800 cutting strokes per minute. The Model SM600 offers a full 2" depth of cut for thick workpieces.
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all
unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline
or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste
wax.
NOTICE: THE MANUAL COVER PHOTO ILLUSTRATES THE CURRENT
PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS ARE REPRESENTATIVE
ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR
ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.
5
Fig. C
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere Total Length Gauge of
Rating Volts of Cord in Feet Extension Cord
0-6 120
up to
25 18 AWG
0-6 120 25-50 16 AWG
0-6 120 50-100 16 AWG
0-6 120 100-150 14 AWG
6-10 120
up to
25 18 AWG
6-10 120 25-50 16 AWG
6-10 120 50-100 14 AWG
6-10 120 100-150 12 AWG
10-12 120
up to
25 16 AWG
10-12 120 25-50 16 AWG
10-12 120 50-100 14 AWG
10-12 120 100-150 12 AWG
12-16 120
up to
25 14 AWG
12-16 120 25-50 12 AWG
12-16 120
GREATER THAN 50 FEET NOT RECOMMENDED
- Changing Feature 1
- GENERAL SAFETY RULES 2
- SAVE THESE INSTRUCTIONS 3
- Refer to them often 3
- POWER CONNECTIONS 4
- GROUNDING INSTRUCTIONS 4
- OPERATING INSTRUCTIONS 5
- SCROLL SAW PARTS 6
- ASSEMBLY 7
- TABLE INSERT 11
- CHANGING BLADES 11
- ADJUSTING BLADE 13
- ADJUSTING 13
- CLAMPING ACTION OF 13
- UPPER BLADE HOLDER 13
- TILTING THE TABLE 14
- ADJUSTING THE TABLE 14
- ADJUSTING HOLDDOWN 15
- ADJUSTING DUST BLOWER 15
- INSIDE CUTTING 16
- FOLLOWING A LINE 16
- LUBRICATION 17
- CHOICE OF BLADE AND SPEED 17
- Two Year Limited Warranty 20
- Sierra de Calar de 21
- NORMAS DE SEGURIDAD GENERALES 22
- GUARDE ESTAS INSTRUCCIONES 23
- ESPECIFICACIONES DEL MOTOR 24
- Amperios En Pies 25
- SIERRA DE CALAR DE PIEZAS 26
- ASAMBLEA 27
- PIEZA DE RELLENO DE LA 31
- CAMBIO DE HOJAS 31
- AJUSTANDO 33
- LA TENSION DE HOJA 33
- AJUSTANDO LA ACCION DE 33
- APRIETE DEL DETENTOR 33
- DE HOJA SUPERIOR 33
- INCLINADO DE LA MESA 34
- AJUSTE DEL RETEN 35
- AJUSTE DEL 35
- SOPLADOR DE POLVO 35
- SIGUIENDO UNA LINEA 36
- CORTADO INTERIOR 36
- LUBRICACION 37
- ROTURA DE LA HOJA 37
- Garant a Limitada de Dos A os 39
- Scie à découper à vitesse 41
- RÈGLES GÉNÉRALES DE SÉCURITÉ 42
- SCIES ¸ D COUPER 43
- CONSERVER CES DIRECTIVES 43
- CONNEXIONS LECTRIQUES 44
- DIRECTIVES DE MISE ¸ LA TERRE 44
- D SEMBALLAGE ET NETTOYAGE 45
- PIØCES DE LA SCIE ¸ D COUPER 46
- ASSEMBLAGE 47
- INSERT DE TABLE 51
- CHANGEMENT DE LAMES 51
- R GLAGE DE LA TENSION 53
- DE LA LAME 53
- R GLAGE L’ACTION D’ TAU 53
- DU PORTE-LAME 53
- SUP RIEUR 53
- INCLINAISON DE LA TABLE 54
- AJUSTEMENT DE LA TABLE 54
- R GLAGE DE LA TIGE DE 55
- R GLAGE DU 55
- D POUSSI REUR 55
- SUIVRE UNE LIGNE 56
- D COUPE INT RIEURE 56
- CHOIX DE LAME ET VITESSE 57
- D PANNAGE - BRIS DE LAME 57
- Garantie limit e de deux ans 58
- · DELTA SERVICE CENTERS 59
- · DELTA) 59
Related products and manuals for Tools Delta SM600
Tools Delta 37-195 User Manual
(24 pages)
(24 pages)
Tools Delta 187-WF User Manual
(1 pages)
(1 pages)
Tools Delta 2302-LHP User Manual
(1 pages)
(1 pages)
Tools Delta 2705 Series User Manual
(4 pages)
(4 pages)
Tools Delta 3583-LHP User Manual
(1 pages)
(1 pages)
Tools Delta 3544-WF User Manual
(1 pages)
(1 pages)
Tools Delta 1748-MDS User Manual
(2 pages)
(2 pages)
Tools Delta 522-WF User Manual
(1 pages)
(1 pages)
Tools Delta 140-WE-DST User Manual
(1 pages)
(1 pages)
Tools Delta TP300 User Manual
(17 pages)
(17 pages)
Tools Delta 3530-LHP User Manual
(1 pages)
(1 pages)
Tools Delta 25915 Series User Manual
(6 pages)
(6 pages)
Tools Delta 2172 Series User Manual
(1 pages)
(1 pages)
Tools Delta 198 User Manual
(1 pages)
(1 pages)
Tools Delta 174930 Series User Manual
(1 pages)
(1 pages)
Tools Delta 2578 Series User Manual
(1 pages)
(1 pages)
Tools Delta 2102LF User Manual
(1 pages)
(1 pages)
Tools Delta 2302 Series User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 1.169 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals