Delta SS1-UM-1.05 User Manual Page 30
- Page / 86
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
30 •
••
• Menus and Screens Document code: SS1-UM-1.05
Menus and Screens
The following table shows the menu options and settings for the Psion Workabout.
Menus for SunData PC software follow a similar layout.
File
Data
Storage
Name ≤
≤≤
≤ 8 chars.
Type in name (and subdirectory) for the data file. .PRN or .CSV
extensions are added automatically, depending on data type.
Press Tab to display a list of files and directories on the specified
Disk. These can be selected too.
Disk
A, B or
Internal
A and B refer to the Solid State Disks - see Workabout manual
page 12. Internal refers to the Workabout memory (RAM).
Subdirectory usage needs care! See User Manual.
Type
Print
File is a directly printable, ASCII file with appropriate formatting.
Comma
separated
File type is best for spreadsheets. Fields are enclosed in commas,
text in "...".
Transfer
send file
Name
Data.prn
Prompts with current data file name, but any other name can be
selected, with Tab or ←
←←
← →
→→
→.
Disk
see above
save as
✳
✳✳
✳.✳
✳✳
✳
Type another name, or the "send file Name" will be used by
default.
Save
Config’n
Name ≤
≤≤
≤ 8 chars.
Type in name for configuration file. Extension .CFG is added
automatically. Press Tab to display a list of files and directories on
the specified Disk.
Disk
see above
Restore
Config’n
Name
Use
←
←←
← →
→→
→ or press Tab to display a list of possible .CFG files from
which to restore.
Disk
see above
Review
Name
View data file on the Workabout screen. Prompts with current data
file name. Select other names with Tab or ←
←←
← →
→→
→
Disk
see above
Format
.CSV
Yes, No
Yes hides the ",,," in a .CSV file. Has no effect on a .PRN file.
Menu
Zoom
Top of File
Bottom of file
Format CSV
Quit
For manoeuvring. Press Menu within a reviewed file. Gives rapid
scrolling, zooming to different magnifications, format/unformat of
.CSV files, and quitting the reviewed file.
Also, Shift+ arrow keys moves one screen at a time. ∪
∪∪
∪+↑
↑↑
↑↓
↓↓
↓ moves
to end of file
Exit
Exit the SunData program
Settings
SunScan
probe
Data from:
SunScan
probe
Light readings are collected from the SunScan probe.
emulator
Light readings are generated by the SunData software - used for
test purposes and for the Tutorial.
Ext sensor:
BFS
Incident PAR and beam fraction readings are collected from a
Beam Fraction sensor attached to the SunScan probe.
none
No external sensor is connected, and readings for incident PAR
and beam fraction (if required) have to be measured using the
SunScan probe itself.
Constants
Absorption
0.5 to 1.0
Set the leaf PAR absorption. 0.85 is typical.
ELADP
0 to 1024
Set the Ellipsoidal Leaf Angle Distribution Parameter, which
models the leaf angles within the canopy. 1 corresponds to a
random spherical distribution, 0 to vertical, and 1024 to horizontal.
Use 1 as default.
- Canopy Analysis 1
- User Manual 1
- Contents 3
- Introduction 6
- SunScan probe 7
- Beam Fraction sensor 7
- Data Collection Terminal 7
- SunData software 7
- Field accessories 7
- Getting Started 8
- The Internal drawer 9
- The Psion Charger 9
- The SunData s/w Diskette 10
- Installing the s/w 10
- Running SunData 11
- Communication checks: 12
- Running SunData in Windows 13
- SunScan Tutorial 14
- What to do if you get lost 15
- GMT for your time zone. Set 18
- File Saving 19
- "Hot Keys" 19
- Taking readings 20
- Connecting the SunScan probe 21
- Reviewing your data file 24
- Conclusion of the Tutorial 28
- Menus and Screens 30
- Settings 31
- (contd.) 31
- Exit the SunData program 32
- The Workabout User Guide 33
- Flashcards - reformatting 35
- Data memory management 36
- Data files 37
- The .PRN file 38
- The .CSV file 38
- Group numbering 39
- Measurement options 41
- Canopy type and LAI estimates 42
- Canopy Sampling volume 42
- ELADP H V= 44
- Workabout setup 46
- The Autolog function 47
- Probe handling in the field 48
- BFS handling in the field 49
- PAR calibrations 51
- LAI theory 54
- The major assumptions 55
- Transmission of Diffuse Light 56
- Assumptions 58
- In detail: 59
- The canopy model 59
- Accuracy of LAI calculations 60
- Scientific references 62
- Technical Reference section 64
- Checking the desiccant 65
- Checking the PAR calibration 66
- Troubleshooting 67
- Technical Support 69
- Specifications 70
- Carrying Case type SCC1 71
- Telescopic Tripod type BFT1 71
- Spares Kit type SPS1 71
- Logging Cables 71
- PAR Performance 72
- Appendices 74
- Choice of different programs 77
- SLINK and RCOM 78
- Example using SLINK 78
- Example using RCOM 80
- ↵ to exit from RCOM 80
- In the communications program 81
- In SunData on the Workabout 81
- F. Glossary 82
© 2020, manymanuals.com. All rights reserved. | 0.499 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals