Delta 50-763 User Manual download pdf (Page 13)

The on/off buttons (A) and (B) Fig. 19 are located on the

front of the motor housing. To turn the machine "ON",

push the "ON" button (A).

To turn the machine "OFF", push the "OFF" button (B).

STARTING AND STOPPING THE

DUST COLLECTOR

OPERATION

Fig. 19

IMPORTANT: When the machine is not in use, the

“ON” button (A) Fig. 19 should be locked to prevent

unauthorized use,

using a padlock (C) Fig. 20 with a

3/16" diameter shackle through the hole beside the

button.

LOCKING SWITCH IN THE “OFF” POSITION

When using this dust collector, do not pick up anything that is burning, smoldering, or smoking,

such as matches, cigarettes, or hot ashes.

Do not use this machine to vacuum combustible explosive materials, such as coal, grain, or

other finely-divided combustible materials.

Do not use this machine to vacuum hazardous, toxic, or carcinogenic materials, such as

asbestos, pesticide, or lead-based paint debris.

Fig. 20

TROUBLESHOOTING

For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the

DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).

MAINTENANCE

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed

air. All plastic parts should be cleaned with a soft damp

cloth. NEVER use solvents to clean plastic parts. They

could possibly dissolve or otherwise damage the material.

WEAR CERTIFIED SAFETY EQUIPMENT

FOR EYE, HEARING AND RESPIRATORY PROTECTION

WHILE USING COMPRESSED AIR.

FAILURE TO START

Should your machine fail to start, check to make sure

the prongs on the cord plug are making good contact

in the outlet. Also, check for blown fuses or open circuit

breakers in the line.

LUBRICATION & RUST PROTECTION

Apply household floor paste wax to the machine table,

extension table or other work surface weekly. Or use a

commercially available protective product designed for

this purpose. Follow the manufacturer’s instructions for

use and safety.

To clean cast iron tables of rust, you will need the

following materials: a pushblock from a jointer, a sheet

of medium Scotch-Brite™ Blending Hand Pad, a can of

WD-40

and a can of degreaser. Apply the WD-40 and

polish the table surface with the Scotch-Brite pad using

the pushblock as a holddown. Degrease the table, then

apply the protective product as described above.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comments to this Manuals

No comments

Delta 50-763 User Manual Page 13

Comments to this Manuals

Related products and manuals for Vacuums Delta 50-763