Delta 50-764 User Manual download pdf (Page 12)

Fig. 11

Fig. 12

ATTACHING TOP FILTER BAGS

DISCONNECT MACHINE FROM POWER

SOURCE

NOTE: TWO PEOPLE ARE NEEDED FOR THIS STEP.

1. Assemble upper (A) and lower (B) bag hanging rods

as shown in Fig. 11.

2. Place 3/8” flat washer on 5/16”x1 1/4” hex head

screw. Insert the screw through hole in center of

bag hanging assembly (A) Fig. 12 and Fig. 12A and

through the hole in the upper bag hanging rod (B)

Fig. 12. Then place another large 5/16” flat washer

on end of screw followed by a 5/16 hex nut. Assem-

bly shown complete in Fig. 12. Tighten all securely

with 12mm wrench.

3. Hang bag loops (C) Fig. 12A around hooks on bag

hanging assembly (B), as shown in Fig. 12A

4. Insert rod (A) Fig. 12B into hole in bracket (B). Make

sure the four bag ends are not twisted.

5. Work open end of filter bag into top groove of dust

collector drum until secure and sealed. (Similar to

how internal ring of bottom bag was inserted, Fig. 9.

It will be necessary to bend and fold the internal bag

retainer ring to fit it into place.

6. Fig. 12C shows the bags installed properly.

7. Repeat steps for the other bag.

Fig. 12A

Fig. 12B

Fig. 12C

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

No comments

Delta 50-764 User Manual Page 12