Delta 50-851 User Manual download pdf (Page 6)

Fig. 8

Fig. 9

Fig. 10

Fig. 11

5. Place ten-hole rubber gasket (J) Fig. 8, on blower

flange (H). Align holes in gasket with mounting holes in

blower flange and press gasket onto flange as shown.

6. Align mounting holes in chute (K) Fig. 9, with holes

in gasket (J), which was assembled in STEP 5. Place a

5/16" lockwasher onto a 5/16-18x5/8" hex head screw,

insert screw through the chute and gasket, thread the

screw into the motor assembly, and tighten securely.

Repeat this process for the 9 remaining holes.

7. Apply a bead of silicone sealant around flange of

chute (K) Fig. 11. Align holes in eight-hole gasket (M)

Fig. 11, with mounting holes in chute (K) and press gasket

into place as shown.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Delta 50-851 User Manual Page 6