Delta 50-866 User Manual download pdf (Page 8)

Fig. 15

Fig. 16

Fig. 17

Fig. 18

9. Fig. 15, illustrates both drums (K) assembled to the

fan and blower assembly (F).

ASSEMBLING DRUM

SUPPORT POSTS TO

BASE AND DRUMS

1. Assemble end of drum support post (A) Fig. 16, to

threaded holes in one corner of base (B). Place a 5/16"

lockwasher (C), on a 5/16-18 x 5/8" hex head screw (D),

insert the screw through the hole in the support post and

thread the screw into the hole in the base. Repeat this

process for the remaining hole. Assemble the remaining

three drum support posts to the base in the same

manner.

2. Assemble the top of drum support post (A) Fig. 17,

to drum (D). Place a 5/16" flat washer onto a 5/16-18 x

5/8" hex head screw, insert screw through the drum

support post and drum, and place a 5/16" lockwasher

onto the screw, and thread 5/16-18 nut onto screw and

tighten securely. Repeat this process for the remaining

hole. Assemble the remaining three drum support posts

to the drums in the same manner.

3. Fig. 18, illustrates the four drum support posts (A)

assembled to the base and drums.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Delta 50-866 User Manual Page 8