Delta AP300 User Manual download pdf (Page 9)

CASTERS

1. Place the dust collector on its side.

2. Insert bolt on caster through the four holes (A)

Fig. 3 in the base of the dust collector.

3. Thread a 3/8-16 flange hex nut (B) Fig. 4 onto each

of the four bolts and tighten securely.

Fig. 3

Fig. 4

EXHAUST FLANGE

1. Align the holes in the exhaust flange (A) Fig. 5 with

the holes in the exhaust flange gasket (B).

2. Insert a 5/16-18x5/8" hex head bolt thru the exhaust

flange, exhaust flange gasket and the base unit as

shown in Fig. 6.

3. Thread a 5/16-18 hex nut (B) onto the 5/16-18x5/8"

hex head bolt (A) Fig. 6 and tighten securely.

4. Repeat this process for the three remaining bolts.

Fig. 5

Fig. 6

ASSEMBLY

1. 1/2” & 9/16" Open or Box End Wrench - not provided

2. 1/2” &

9/16" Socket and Drive - not provided

Flat or Phillips Screwdriver - not provided

ASSEMBLY TIME ESTIMATE 1-2 hrs.

ASSEMBLY TOOLS REQUIRED

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

No comments

Delta AP300 User Manual Page 9