Delta 210 Series Specifications Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
Technical Specifications (Cont.)
Input Impedance
DM24: Voltage Input 205,000 ohms for 0 (2) to 10 V and
410,000 ohms for 0 (4) to 20 V
Current Input 500 ohms
DRM24: 1.8 megohms
Feedback Signal
-FB135: 135 ohm feedback potentiometer
-FB1K: 1,000 ohm feedback potentiometer
DM24: 0 to 10 VDC or 2 to 10 VDC for 90° (10 VDC at 1 mA),
corresponds to input signal span selection.
DRM24: 0 to 10 VDC for 90° (10 VDC at 1 mA)
Auxiliary Switch Rating
-A: Two Single-Pole, Double Throw (SPDT) switches rated at 24 VAC
1.5 A inductive, 3.0 A resistive, 35 VA maximum per switch,
Class 2
Mechanical Output
(Running Torque)
D-70 Series: 70 lb·in (8 N·m) for one unit; not intended for tandem use
D-140 Series: 140 lb·in (16 N·m) for one unit
DM-140 (in tandem): 280 lb·in (32 N·m) for two units
D-210 Series: 210 lb·in (24 N·m) for one unit
D or DM-210 (in tandem): 420 lb·in (48 N·m) for two units
D-280 Series: 280 lb·in (32 N·m) for one unit
D or DM-280 (in tandem): 560 lb·in (64 N·m) for two in units
Audible Noise Rating
45 dBA at 1 m
Rotation Range
0 to 90° in 5-degree increments, mechanically limited to 93°
Rotation Time
(Each Series)
D-70 Series: 30 s at 50% rated load
25 to 50 s for 0 to 70 lb·in (0 to 8 N·m)
D-140 Series: 80 s at 50% rated load,
70 to 115 s for 0 to 140 lb·in (0 to 16 N·m)
D-210 Series: 130 s at 50% rated load
115 to 175 s for 0 to 210 lb·in (0 to 24 N·m)
D-280 Series: 140 s at 50% rated load
115 to 205 s for 0 to 280 lb·in (0 to 32 N·m)
Electrical Connection
D-210 Series and D-280 Series:
1/4 in. spade terminals with pluggable terminal blocks
All Other Models: Screw terminals for 22 to 14 AWG; a maximum of two
18, 20, or 22 AWG per terminal
Mechanical Connection
3/8 to 3/4 in. (10 to 20 mm) diameter round shaft or
3/8 to 5/8 in. (10 to 16 mm) square shaft
Enclosure
NEMA 2, IP42
Ambient Conditions
Operating: -4 to 122°F (-20 to 50°C); 0 to 95% RH, noncondensing
Storage: -40 to 186°F (-40 to 86°C); 0 to 95% RH, noncondensing
Dimensions (H x W x D)
7.09 x 3.94 x 2.54 in. (180 x 100 x 64.5 mm)
Shipping Weight
2.9 lb (1.3 kg)
Agency Compliance
UL Listed, File E190867, CCN XAPX
CSA Certified, File LR703029, Class 3221 02
CE Mark, EMC Directive 89/336/EEC
Plenum rated in accordance with CSA C22.2 No. 236/UL 1995, Heating and Cooling
Equipment.
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult Delta Control Products. Delta Control Products, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Delta Control Products, Inc.
2031 West Rose Garden Lane
Phoenix, Arizona 85027 Printed in U.S.A.
1-800-377-2600 www.deltacp.com
8 D-70, D-140, D-210, and D-280 Series Electric Non-Spring Return Actuators Installation Instructions
Page view 7
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments