Delta 210 Series Specifications Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
8
Power Switch (1)
Switch to “ON” position to turn on.
Pilot Light LED (2)
Illuminates when AC power is being supplied to the unit.
Tremolo Speed (3)
The speed control determines the rate at which the signal is modulated. This control varies the speed of the Tremolo master
oscillator and should provide any speed desired for modern music. Clockwise rotation of the speed control increases the
speed of the modulation of the tremolo. The Tremolo feature is defeatable from a remote footswitch.
Tremolo Intensity (4)
The intensity control is used to vary the amount of amplitude modulation of the clean signal. It can be adjusted from barely
perceptible to dramatic modulation. Clockwise rotation of the intensity control increases the depth of the tremolo.
Effects Return (5)
Input for returning signals to external effects or signal processing equipment.
Effects Send (6)
Output for supplying signal to external effects or signal processing equipment.
Treble, Middle AND Bass EQ (7)
Passive tone controls that regulate high, mid, and low frequencies, respectively.
Boost Switch (8)
Boosts the overall system gain. Depress to the "in" position to activate.
Reverb (9)
Reverberation is an echo effect. Rotate clockwise to increase the effect.
Post Gain (10)
Controls the overall volume level of the Lead channel. The final level adjustment should be made after the desired sound has
been activated.
Pre Gain (11)
Controls the input volume level of the Lead channel.
Channel Select Switch (12)
Allows selection of the Lead or Normal channel.
Note: Channel selection may also be achived by the remote footswitch. If remote selection is desired, the channel switch must
be in the "in" (Lead) position.
Front Panel
1
7
5
WARNING
THE ON/OFF SWITCH IN THIS APPARATUS
DOES NOT BREAK BOTH SIDES OF THE MAINS.
HAZARDOUS ENERGY MAY BE PRESENT INSIDE
THE ENCLOSURE WHEN THE POWER SWITCH IS
IN THE OFF POSITION.
2
34
6
8
910
12
11
Page view 4
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments