Delta 211 Series Specifications download pdf (Page 24)

Chapter 4 Control Registers

CR#7: Displaying a gross weight/net weight

[Description]

Users can choose to display a gross weight or a net weight. The channel which is not used can be disabled.

Bit 15~bit 8 Bit 7~bit 0

CH2 CH1

K0: Displaying a gross weight

K1: Displaying a net weight

CR#8~11: Tare measured by CH1/CH2

[Description]

Tares are displayed in CR#8~CR#11. Users can write tares to CR#8~CR#11, or use CR#8~CR#11 to read

tares.

CR#12~15: Weight measured by CH1/CH2

[Description]

Weights are displayed in CR#12~CR#15.

CR#16~17: Number of weights measured by CH1 in a stability range

[Description]

Factory setting: K5

Setting range: K1~K500

Please refer to section 4.3.2 for more information.

CR#18~19: Stability range for CH1/CH2

[Description]

Factory setting: K10

Setting range: K1~K10,000

Please refer to section 4.3.2 for more information.

CR#25: Total number of points which need to be adjusted

[Description]

Factory setting: K2

Setting range: K2~K20

Users generally adjust two points, but they can adjust several points. The maximum number of points which

can be adjusted is 20.

CR#26: Adjustment command

[Description]

An adjustment command is stored in CR#26.

Command value Description of CR#26

K1~K20

K1: The command value is used when no

weight is measured by CH1.

K2~K20: The command values are used when

point 1~point 19 which are measured

by CH1 need to be adjusted.

K21~40

K21: The command value is used when no

weight is measured by CH2.

K22~K40: The command values are used when

point 1~point 19 which are measured

by CH2 need to be adjusted.

4-7

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 40 41

Comments to this Manuals

No comments

Delta 211 Series Specifications Page 24

Comments to this Manuals

Related products and manuals for Water dispensers Delta 211 Series