Delta 211 Series Specifications download pdf (Page 27)

DVP201/202/211LC-SL Load Cell Module Operation Manual

Gross weight=10.2 kg

 Relevant control registers

 CR#6: Returning to zero/Subtracting a tare

 CR#7: Displaying a gross weight/net weight

 CR#8~11: Tare measured by CH1/CH2

4.3.2 Stability Check

When an object is put on a load cell, users can check whether the present weight of the object is in a stability

range specified.

 If a weight measured is in a stability range specified by users (CR#18/CR#19), bit 6/bit 11 in CR#51 will be

set to 1.

 If a weight measured exceeds a range specified by users (CR#18/CR#19), bit 6/bit 11 in CR#51 will be set

to 0. Bit 6/Bit 11 in CR#51 will not be set to 1 until the number of weights measured in a stability range

reaches the value in CR#16/CR17.

Example: The measurement time set is 10 milliseconds, the number of weights measured in a stability range is

10, and the stability range set is 1000 grams. If a variation exceeds 1000 grams, bit 6/bit 11 in CR#51 will be set

to 0. If the variations in 100 milliseconds (10×10 ms) are within 1000 grams, bit 6/bit 11 in CR#51 will be set to 1.

(Users should judge whether the present weight measured is in the stability range set before they perform

control.)

bit

Bit 6/Bit 11 in CR#51

△: Variations in average weights

T: Measurement time set by users

K: Stability range set by users

M: Number of weights measured in

a stability range

Time

Average weight

△

△>

△<

△>

△<

 Relevant control registers

 CR#16/CR#17: Number of weights measured by CH1/CH2 in a stability range

 CR#18/CR#19: Stability range for CH1/CH2

4-10

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 40 41

No comments

Delta 211 Series Specifications Page 27