Delta 211 Series Specifications download pdf (Page 28)

Chapter 4 Control Registers

4.3.3 Determining Zero

If an object is removed from the load cell used, bit 6/bit 11 in CR#51 will be set to 1, bit 5/bit 10 in CR#51 will be

set to 1, and users can perform the next control. (If a weight measured is in the zero range specified, bit 5/bit 10

in CR#51 will be set to 1.)

DVP202LC-SL

Ch1

CH2

Load cell

No object

Average weight

Zero weight

Zero range

Time

 Relev

ant control registers

 CR#48/CR#49: Range for determining whether a weight measured by CH1/CH2 is 0 grams

4.3.4 Filtering out Weights

There are two ways to filter out weights.

 Filtering out the maximum/minimum weight measured: If there is a maximum weight or a minimum weight,

CR#45/CR#46 can be used to filter out the maximum weight or the minimum weight. If the value in

CR#45/CR#46 is bigger, more weights will be filtered out. Setting range: K0~K8

 Averaging weights: The values read are averaged so that a steady value is obtained. There may be peak

values due to unavoidable external factors, and the average value obtained changes accordingly. The

maximum number of values which can be averaged are 100.

4-11

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 40 41

No comments

Delta 211 Series Specifications Page 28