Delta PG-40 Specifications Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
DELTA LTL-X Retrometer 35
ing the LEFT button or rolling the bar out of the top by pressing the UP button.
To return to the log menu, press OK or BACK
Printing.
Press the PRINT / OUT button to print the log from the highlighted measurement to the end
of (newest data) the log.
The printing can be aborted at any time by pressing and holding the PRINT / OUT button or
the ON / OFF button for about 0.5 sec. Release the button as soon as the printing stops.
View series data.
In the log menu, select SERIES to view the list of series:
VIEW SERIES: OK
ROAD #1
ROAD #2
HIGHWAY #1
HIGHWAY #2
HIGHWAY #3
1 11 04 2001 - 11 04 2001
The menu shows a series ID in each line. By pressing DOWN or UP, the individual series are
highlighted and corresponding number of measurements taken and the date interval for the
measurement are shown in the bottom of the display. These data are: the number and the date
interval for the measurement taken in the series.
Highlight a series and press the OK button to view the individual measurements.
To return to the VIEW SERIES menu, press the OK or the BACK button.
Printing.
Highlight a series name and press the PRINT / OUT button to print all the series data from the
highlighted measurement to the end (newest data) of the log.
Highlight a measurement in the individual display and press the PRINT / OUT button to print
the log from the highlighted measurement to the end of the series.
The printing can be aborted at any time by pressing and holding the PRINT / OUT button or
the ON / OFF button for about 0.5 sec. Release the button as soon as the printing stops.
Log status
To see how much of the memory is used, press the MENU button and select LOG / STATUS:
LOG STATUS OK
LOG USED: 104
LOG FREE: 1396
SERIES USED: 15
SERIES FREE: 235
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 55 56

Comments to this Manuals

No comments