Page 14
As soon as the gateway has been identied via the MAC
address, the SOLIVIA Monitoring Portal automatically calls
the connected power inverter.
If all power inverters are correctly connected with one
another via the RS485 interface and a different RS485
ID is congured for every power inverter, then all power
inverters are automatically recognized.
There is no need to create a power inverter manually!
The identied power inverters are entered in the list.
If not all power inverters of the PV system are displayed,
check whether all power inverters are correctly connected
with one another via the RS485 interface and a different
RS485 ID is congured for every power inverter.
Each power inverter automatically transfers various infor-
mation to the SOLIVIA Monitoring Portal (e.g. the serial
number and the RS485 ID). This information is also dis-
played.
The details for the MPP tracker must be entered manually.
See the descriptions on the next page.
To complete the power inverter data,
click here and open the le view.
This information is entered automatically.
Copy the current settings to other power inverters.
Set up a PV system | Power inverter | Create power inverter
Copy the current settings to other power inverters.
Select the power inverter to which
you want to copy the settings for
the current power inverter.
Click here to copy the settings
to the selected power inverter.
Click here to copy the settings
Comments to this Manuals