Delta 36-865 Instruction Manual download pdf (Page 5)

FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.

ADDITIONAL SPECIFIC SAFETY RULES

SAVE THESE INSTRUCTIONS.

Refer to them often and use them to instruct others.

1. DO NOT OPERATE THIS MACHINE until it is completely

assembled and installed according to the instructions. A

machine incorrectly assembled can cause serious injury.

2. OBTAIN ADVICE from your supervisor, instructor, or

another qualified person if you are not thoroughly familiar

with the operation of this machine. Knowledge is safety.

3. FOLLOW ALL WIRING CODES and recommended electri-

cal connections to prevent shock or electrocution.

4. NEVER TURN THE MACHINE “ON” before clearing the

table/work area of all objects (tools, scraps of wood, etc.).

Flying debris is dangerous.

5. NEVER TURN THE MACHINE “ON” with the workpiece

contacting the stock feeder.

6. AVOID AWKWARD OPERATIONS AND HAND POSI-

TIONS. A sudden slip could cause a hand to move into

the stock feeder or the blade of the cutting machine.

7. KEEP ARMS, HANDS, AND FINGERS away from the

rotating parts of feeder and cutting machine.

8. ALLOW THE BLADE OF THE CUTTING MACHINE TO

REACH FULL SPEED before feeding a workpiece into the

stock feeder.

9. NEVER PERFORM LAYOUT, assembly, or set-up work

on the table/work area when the machine is running.

10. TURN THE MACHINE “OFF” AND DISCONNECT THE

MACHINE from the power source before installing or

removing accessories, before adjusting or changing set-

ups, or when making repairs.

11. TURN THE MACHINE “OFF”, disconnect the machine

from the power source, and clean the table/work area

before leaving the machine. LOCK THE SWITCH IN THE

“OFF” POSITION to prevent unauthorized use.

12. ADDITIONAL INFORMATION regarding the safe and

proper operation of power tools (i.e. a safety video) is

available from the Power Tool Institute, 1300 Sumner

Avenue, Cleveland, OH 44115-2851 (www.powertoolinsti-

tute.com). Information is also available from the National

Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-

3201. Please refer to the American National Standards

Institute ANSI 01.1 Safety Requirements for Woodworking

Machines and the U.S. Department of Labor OSHA

1910.213 Regulations.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Delta 36-865 Instruction Manual Page 5

Comments to this Manuals