Delta A00543 User Manual download pdf (Page 6)

6- ENG

A00543

ASSEMBLY INSTRUCTIONS

NOTE: The high pressure pump was

filled with oil at the factory. There is no

need to add oil at this time, see the

Maintenance section of this manual

for Maintenance information.

5. Connect wand to gun. Tighten

securely.

4. Attach high

pressure hose to

gun. Tighten

securely.

1. Place the nozzle holder onto the

panel (located on the handle

assembly) and push each nozzle

holder into place.

2. Remove five colored quick

connect nozzles from plastic bag

and insert them into correct

grommet on the nozzle holder.

NOTE: Nozzles are color coded to

match colored nozzles on panel.

3. Place handle assembly onto frame,

depress the snap buttons, and slide

the handle assembly onto the frame

until snap buttons snap into place.

CARTON CONTENTS

Bagged Parts

Nozzle

Cleaning

Tool

Engine Frame

and Wheel

Assembly

High Pressure

Hose

Chemical

Hose

Spray Gun

Quick Connect Spray Wand

Quick

Connect

Nozzles

Nozzle

Holder

The shipping plug

must be removed

and replaced with the dipstick/oil

plug before operating pressure

washer.

7. Using a 17 mm

wrench, remove

shipping plug from

pump by turning it

counterclockwise.

Discard plug.

8. Remove dipstick/oil plug from

plastic bag and install into pump,

tighten securely.

Engine

Manual

Handle

English/

Spanish

Operator’s

Manual

Engine

Oil

6. Add engine oil (supplied) to engine.

Refer to Engine Owners Manual

supplied by engine manufacturer for

correct procedure.

NOTE: There will be a slight amount of

oil in the engine from factory testing.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments