Delta DTT2450 Instruction Manual download pdf (Page 7)

7- ENG

A04032

OPERATING INSTRUCTIONS

BASIC ELEMENTS OF A

PRESSURE WASHER

High Pressure Pump (located inside

the shroud): Increases the pressure of

the water supply.

Engine: Drives the high pressure

pump.

High Pressure Hose: Carries the

pressurized water from the pump to

the gun and spray wand.

Spray Gun: Connects with spray wand

to control water flow rate, direction,

and pressure.

Multi-Adjustable Spray Wand: Allows

the user to use high or low pressure

and adjusts from a pencil stream (0°)

to a wide angle fan spray (40°). See

How To Use Spray Wand instructions in

this section.

Chemical Hose: Feeds cleaning

agents into the pump to mix with the

water. See How To Apply

Chemicals/Cleaning Solvents

instructions in this section.

Compare the illustrations with your unit to familiarize yourself with the location of

various controls and adjustments. Save this manual for future reference.

Engine

High

Pressure

Hose

Spray

Gun

Multi-

Adjustable

Spray Wand

Chemical

Hose

High Pressure Pump

(located inside the

shroud)

BASIC ELEMENTS OF AN

ENGINE

Refer to the engine manual for location

and operation of engine controls.

Primer Button: Injects fuel directly

into the carburetor manifold for easier

cold engine starting.

Starter Grip: Pulling starter grip

operates recoil starter to crank engine.

Throttle Control Lever: Controls

engine speed.

PRESSURE WASHER

TERMINOLOGY

PSI: Pounds per Square Inch. The unit

of measure for water pressure. Also

used for air pressure, hydraulic

pressure, etc.

GPM: Gallons Per Minute. The unit of

measure for the flow rate of water.

CU: Cleaning Units. GPM multiplied by

PSI. GPM x PSI = CU.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Delta DTT2450 Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for High-pressure cleaners Delta DTT2450