Delta 37-195 User Manual download pdf (Page 12)

ASSEMBLING DUST CHUTE

The jointer stand has a built-in dust chute (A) Fig. 25. If this machine is to be used with a dust collection system, the

supplied dust collector connector (B) Fig. 26, can be fastened to jointer stand (C) with four #10-16x1/2" sheet metal

screws (D) as shown.

A standard 4" dust collection hose can be attached to dust collector connector.

Fig. 25

Fig. 26

OPERATING CONTROLS AND ADJUSTMENTS

STARTING AND STOPPING

JOINTER

1. The on/off switch is located underneath the switch

shield (B) Fig. 31. To start the jointer, move switch (A) up

to the “ON” position.

2. To turn the jointer “OFF”, push down on switch

shield (B) Fig. 32, as shown.

Fig. 31

Fig. 32

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

No comments

Delta 37-195 User Manual Page 12