Delta 8" VARIABLE SPEED GRINDER GR450 User Manual download pdf (Page 9)

If the grinder has a tendency to tip over, slide, or walk,

secure it to the supporting surface, using fasteners (not

supplied) through the two holes (A) Fig. 7 in the grinder

base.

Always wear eye protection.

To attach the eye shields:

1. Place the eye shield (A) Fig. 4 on the spark guard.

2. Align the holes in the eye shield with the holes in the

spark guard. Place the eye shield spacer (A) Fig. 5

in the space in the spark guard.

3. Insert the eye shield bolt (A) Fig. 6 through the hole

in the eye shield (B), the eye shield spacer (C), and

the spark guard (D).

4. Place a 1/4" flat washer (E) Fig. 6 on the end of the

eye shield bolt. Attach the eye shield knob (F) to the

end of the eye shield bolt.

5. Install the other eye shield in the same manner.

Fig. 5

Fig. 6

Fig. 7

Fig. 4

FASTENING THE GRINDER A SUPPORTING SURFACE

Your grinder is supplied with two shields to protect your eyes.

EYE SHIELDS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

No comments

Delta 8" VARIABLE SPEED GRINDER GR450 User Manual Page 9