Delta 36-648 Instruction Manual download pdf (Page 12)

4. WITH A MINIMUM OF TWO PEOPLE,

CAREFULLY TURN THE SAW AND STAND UPRIGHT

AS SHOWN IN FIG. 10. Carefully push down on the top

of the saw until the stand legs adapt to the floor surface.

Make sure the table top is level and firmly tighten all

stand mounting hardware.

Fig. 10

BLADE TILTING

AND RAISING HANDWHEEL

2. Assemble the blade raising handwheel (A) Fig. 12, to

the front of the saw in the same manner.

1. Place blade tilting handwheel (A) Fig. 11, onto shaft

(B). Make certain slot (C) in handwheel is engaged with

roll pin (D) on the shaft. Place a 10mm flat washer (D)

onto shaft (B) Fig. 11. Thread locking knob (E) Fig. 12,

onto shaft (B) Fig. 11.

Fig. 11

Fig. 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

Delta 36-648 Instruction Manual Page 12