Delta MS210 User Manual download pdf (Page 16)

MS210

MS210 DS004 www.mshinetek.com

- 16 -

The above information is the exclusive intellectual property of M-Shine Technologies Corporation and shall not be disclosed, distributed without permission

rom M-

hine.

high-frequency noise rejection, but will be enough for normal recording applications. The combined

Frequency response of the digital filter is as below:

Figure 9. Decimation Filter Response with 8 KHz sample rate.

The combined filter response in in-band frequency is as Figure 10, which shows that the filter will have

in-band filtering of 3.0 KHz around 5 DB, and 4.0 KHz of 8 DB.

That is, MS210 ADC is better working with the external analog filter, with higher sampling rate. If sampling

rate at 16.0 KHz and OP-AMP with external components can provide better rejection of signals higher than

8.0 KHz, the recording effect will be very good.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 34 35

Contents 2
Figures 3
Features 4
Block Diagram 5
Application 5
Package 5
General Description 5
PAD Configuration (Draft) 6
Pins Configuration 7
Pin Descriptions 7
PKG Part No.MS210A28A 7
MS210 10
Reset and Initialization 11
Manual Reset 12
Used SPI Commands 13
Record Timing 14
Recording Signal Path 15
SPI Flash Recording Flow 19
SPI Power Noise Rejection 20
Playing Function Description 21
Segment 1 Segment 1 22
RECL over PLAL 24
Recording New 25
Segment 1 25
Playing-Stop Condition 26
Voice Changer Function 28
Sample Rate and Resistor 30
Typical Application Circuits 31
Absolute Maximum Ratings 33
AC Characteristics 34
Package Outline 35

Comments to this Manuals

No comments

Delta MS210 User Manual Page 16

Comments to this Manuals

Related products and manuals for Circular saws Delta MS210