Delta 50-850 Instruction Manual download pdf (Page 8)

Fig. 18

Fig. 19

Fig. 22

Fig. 20

Fig. 21

ASSEMBLING FILTER AND

DUST COLLECTION BAGS

TO DRUM

1. Hook the loop on the top of filter bag (A) Fig. 18,

onto filter bag support rod (B) as shown.

2. Assemble extension rod (C) Fig. 19, onto the end of

filter bag support rod (B). Raise support rods (B) and (C),

with filter bag (A) attached and place end of support rod

bag extension rod will prevent the rod from sliding through

bracket.

3. Position open end of filter bag (A) Fig. 19, over lip of

dust drum (E). Insert locking band (F) Fig. 20, through

the loops of filter bag (A) and fasten with clamp (G) as

shown in Fig. 21. NOTE: Make certain locking band is

positioned in the channel of drum (F) before fastening

clamp.

4. Pull up on each retaining clip (A) Fig. 22, and insert

the dust collection bag (B) underneath each retaining clip

to hold the dust collection bag in place.

5. Place the locking clamp (C) Fig. 22 around dust

collection bag and dust collector drum and lock in place.

NOTE: Make certain locking clamp is positioned in the

channel of the dust collector drum before locking clamp.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Delta 50-850 Instruction Manual Page 8