Delta SA446 Instruction Manual download pdf (Page 7)

EXTENSION CORDS

Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire

extension cord which has a 3-prong grounding type plug and matching receptacle which will accept the machine’s

plug. When using an extension cord, be sure to use one heavy enough to carry the current of the machine. An

undersized cord will cause a drop in line voltage, resulting in loss of power and overheating. Fig. D-1 shows the

correct gauge to use depending on the cord length. If in doubt, use the next heavier gauge. The smaller the gauge

number, the heavier the cord.

Fig. D-1

MINIMUM GAUGE EXTENSION CORD

RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES

Ampere Total Length Gauge of

Rating Volts of Cord in Feet Extension Cord

0-6 120

up to

25 18 AWG

0-6 120 25-50 16 AWG

0-6 120 50-100 16 AWG

0-6 120 100-150 14 AWG

6-10 120

up to

25 18 AWG

6-10 120 25-50 16 AWG

6-10 120 50-100 14 AWG

6-10 120 100-150 12 AWG

10-12 120

up to

25 16 AWG

10-12 120 25-50 16 AWG

10-12 120 50-100 14 AWG

10-12 120 100-150 12 AWG

12-16 120

up to

25 14 AWG

12-16 120 25-50 12 AWG

12-16 120

GREATER THAN 50 FEET NOT RECOMMENDED

FOREWORD

FUNCTIONAL DESCRIPTION

NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in

the manual are representative only and may not depict the actual color, labeling, or accessories, and are intended to

illustrate technique only.

The Delta ShopMaster Model SA446 is a 4" Belt, 6" Disc Sander that comes equipped with a 1/3 hp 120 Volt Single

Phase Induction Motor, a tilting table, a miter gauge, a backstop, a 4" x 36" 60-grit sanding belt, and a 6" 60-grit

sanding disc. You can mount the tilting table for use on either the belt or disc unit, and can operate the belt in the

horizontal position, the vertical position, or any position in between.

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Comments to this Manuals

No comments

Delta SA446 Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Power sanders Delta SA446