Delta MS450 Instruction Manual download pdf (Page 9)

Fig. 5

MOVING CUTTINGHEAD TO

THE UP POSITION

1. Push down slightly on the cuttinghead (B) Fig. 4

while pulling out the cuttinghead lockpin (A). Move

the cuttinghead (B) to the up position.

2. Fig. 5, illustrates the lockpin (A) pulled out and the

cuttinghead (B) in the up position.

MAKE SURE SAW CUTTINGHEAD

RETURNS FREELY TO THE FULL RAISED POSITION

TO ENSURE THE LOWER BLADE GUARD FULLY

ENCLOSES THE BLADE.

ASSEMBLY

ASSEMBLY TOOLS REQUIRED

ASSEMBLY TIME ESTIMATE

3mm hex wrench (supplied)

Assembly time for this product will be about 30 minutes to an hour.

ATTACHING THE MITER HANDLE

Thread the miter saw handle (A) Fig. 5A or (6) Fig. 2

into the hole in the table (B) Fig. 5A.

Fig. 5A

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

12" Compound Miter Saw 1
TABLE OF CONTENTS 2
IMPORTANT SAFETY INSTRUCTIONS 2
CALIFORNIA PROPOSITION 65 3
GENERAL SAFETY RULES 4
SAVE THESE INSTRUCTIONS 5
POWER CONNECTIONS 6
MOTOR SPECIFICATIONS 6
GROUNDING INSTRUCTIONS 6
FUNCTIONAL DESCRIPTION 7
CARTON CONTENTS 8
ASSEMBLY 9
ATTACHING THE EXTENSION WINGS 10
POSITION 10
ATTACHING THE FENCE SLIDE 11
ATTACHING THE WORK CLAMP 11
ATTACHING DUST BAG 11
OPERATIONS 12
MOVABLE TABLE AND BASE 13
ROTATING TABLE FOR MITER 13
ADJUSTING SLIDING FIT BETWEEN 13
ADJUSTING FENCE 90° TO BLADE 14
TABLE HAZARD ZONE 14
TILTING CUTTINGHEAD FOR BEVEL 15
ADJUSTING SLIDING FENCE AND 15
WORK CLAMP 15
ADJUSTING 0° AND 45° BEVEL 16
POSITIVE STOPS 16
TRUNNION AND BEVEL BRACKET 16
MACHINE USE 18
CUTTING ALUMINUM 19
CUTTING BOWED MATERIAL 19
WORK SUPPORT EXTENSIONS 19
CUTTING CROWN MOULDING 20
MAINTENANCE 21
TROUBLESHOOTING 21
ACCESSORIES 22
WARRANTY 22
MANUAL DE INSTRUCCIONES 23
PROPOSICIÓN DE CALIFORNIA 65 24
NORMAS GENERALES DE SEGURIDAD 25
PARA CORTAR INGLETES 27
ESPECIFICACIONES DEL MOTOR 28
CORDONES DE EXTENSIÓN 29
CONTENIDO DE CARTON 30
ENSAMBLAJE DE LA AGARRADERA 31
DE CIERRE DE LA MESA 31
CONECTAR LAS ALAS DE LA 32
EXTENSION 32
POSICIÓN DE CORTE A 0 GRADOS 32
CONECTAR EL RESBALADERO 33
DE LA CERCA 33
CONECTAR LA ABRAZADERA DEL 33
OPERACIÓN 34
INGLETES 35
AJUSTE DEL ENCAJE DESLIZANTE 35
ENTRE LA MESA MÓVIL Y LA BASE 35
RESPECTO A LA HOJA 36
ZONA DE PELIGRO DE LA TABLA 36
INCLINACIÓN DE LA CABEZA DE 37
CORTE PARA CORTAR EN BISEL 37
EL AJUSTE DESLIZAR LA CERCA Y 37
ABRAZADERA DE TRABAJO 37
UTILIZAR LA MAQUINA 40
CORTE DE ALUMINIO 41
CORTE DE MATERIAL ARQUEADO 41
EXTENSIONES DE SOPORTE 41
PARA LA PIEZA DE TRABAJO 41
CORTE DE MOLDURA DE CORNISA 42
MOLDURA DE CORNISA DE 45-45 42
OTROS ÁNGULOS 42
MANTENIMIENTO 43
GUIA LOCALIZACION DE FALLAS 43
SERVICIO 44
GARANTIA 44
ACCESORIOS 44
• DELTA SERVICE CENTERS 48
• DELTA) 48

Comments to this Manuals

No comments

Delta MS450 Instruction Manual Page 9

Comments to this Manuals

Related products and manuals for Power tools Delta MS450