Delta Digital timer User's Guide download pdf (Page 11)

HELPLINE No. U K / N.IRELAND 0800 328 6020 REP. IRELAND 00800 4467 5888

WEB SUPPORT [email protected] GT-ZSd-02

Using the countdown function

This function switches off a connected consumer following an adjustable time.

- To correctly input the times, the device is to be in time mode (shortly press button

once, if applicable).

- To cancel the process, press the button once as well.

- If you press the second button more than 10 seconds later than the first one, the appli-

ance switches back to general operation and you are to repeat the entire process.

1. Press -.

The display shows

ON --:-- and .

2. Press the SET button.

The hours display starts flashing.

3. Specify the hours of the countdown using the + or - buttons.

4. Press SET.

5. Consecutively set the minutes and seconds of the countdown, as described beforehand.

6. Press the CD button.

The connected consumer is supplied with power. The countdown starts.

As soon as the countdown is at zero, power supply is interrupted and the connected device is again

disconnected from the mains. The specified time is shown in the display again.

Please note:

z Pressing the CD button shortly stops and restarts the countdown. If you do not repeatedly press

the CD button after 10 seconds, the timer switch returns to standard time mode.

z Pressing the button with the countdown running shortly displays the time, before the device

returns to countdown mode.

z Following expiration of the countdown the set countdown time is deleted automatically. It has

to be input again for a next countdown.

Manually switching on and off

You can switch on of off the timer switch at any time by pressing M. Manually switching on and

off precedes all other device functions.

Please note the display:

E43247 Digitale Zeitschaltuhr Innen Aldi UK.book Seite 11 Dienstag, 20. Juli 2010 3:07 15

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Delta Digital timer User's Guide Page 11