Delta 43-460 User Manual download pdf (Page 5)

Do not expose this machine to rain or operate the machine in damp locations.

POWER CONNECTIONS

MOTOR SPECIFICATIONS

This machine is not supplied with a power cord, and must be be permanently connected to the building electrical

system and grounded according to the National Electrical Code and/or local codes and ordinances. Since this machine

is permanently connected to the building electrical system, extension cords cannot be used with this shaper.

Permanently connected tools:

If the tool is intended to be permanently connected the tool should be connected to a grounded metal permanent wiring

system, or to a system having an equipment-grounding conductor.

GROUNDING INSTRUCTIONS

This machine is wired for 230 volt, 60 HZ alternating current. Before connecting the machine to the power source, make

sure that the switch is in the “OFF” position.

This machine must be grounded while in use to protect the operator from electric shock.

FOREWORD

Delta Model 43-460 is a 5 HP, single phase, 230V wood shaping machine. It utilizes a Poly V-belt drive system that transmits

more efficient torque to the spindle and has a capacity (under nut) of 5".

FUNCTIONAL DESCRIPTION

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from

all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,

gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household

floor paste wax.

NOTICE: The manual cover photo illustrates the current production model. All other illustrations are

representative only and may not depict the actual color, labeling, or accessories.

CARTON CONTENTS

1. 10" Wide Cast Iron Extension Wings (2)

2. Wrenches (2)

3. 7/16-20 x 1" Hex Head Screws (6) for

mounting extension wing

4. Flat Washers (6) for mounting extension wing

5. Handwheel

6. Key for Handwheel

7. Lock Knob

8. Spindle Guard

9. 1-1/4" I.D. Washer (2)

10. 1-1/4" I.D. x 3/8” Thick Collar

11. 1-1/4" I.D. x 1/2” Thick Collar

12. 1-1/4" I.D. x 5/8” Thick Collar

13. 1-1/4" I.D. x 1” Thick Collars (3)

14. Spindle Nut

15. Keyed Washer

16. Spindle

17. Tie Rod

18. Tie Rod Nut

19. Starting Pin

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Delta 43-460 User Manual Page 5

Comments to this Manuals

Related products and manuals for Equipment Delta 43-460