Delta 48313 Installation Manual download pdf (Page 12)

E.

F.

Slide O-ring (1) over cartridge and the

bonnet nut (2). The O-ring, which acts as

a spacer to steady the sleeve, should rest

behind the bonnet nut.

Slide the sleeve (1) over the cartridge,

body and O-ring. Ensure sleeve is properly

positioned over the front of cartridge.

18 Series Installation - Single Unit

1

2

1

For back to back or reverse installations

(hot on right and cold on left): Rotate

cartridge (1) so the words “HOT SIDE” (2)

appear on the right. Install the cartridge

Back to back Installation

Reverse

Installation

Cold

Hot

1

3

making sure that the key is fully engaged

with the slot in the brass body (see step D).

Slide bonnet nut (3) over the cartridge and

thread onto the body. Hand tighten securely.

Cartridge Installation

10

2

Normal Installation

(changes not required)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 77 78

Comments to this Manuals

No comments