Delta 23-735 User Manual download pdf (Page 13)

OPERATIONS

IMPORTANT: KEEP SPARK GUARDS AND EYE

SHIELDS IN PLACE AT ALL TIMES.

Figures 23, 24, and 25, illustrate several typical

operations that can be accomplished using the grinder.

Each tool rest should be positioned a little below the

center of the grinding wheel and adjusted so the edge of

the tool rest is as close as possible to the grinding wheel

for maximum support to the piece that is being ground.

This is the most practical and safest position for general

work.

As the grinding wheel wears down to a smaller diameter,

readjust the tool rest closer to the grinding wheel. Always

maintain a distance of 1/8" or less between the grinding

wheel and the edge of the tool rest. Free hand grinding

without the use of the tool rest should always be done on

the lower quarter of the grinding wheel. Please read the

“SAFETY RULES” in the front of this manual and follow

them while operating this tool.

Fig. 23

Fig. 24

Fig. 25

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Delta 23-735 User Manual Page 13