Delta 28-348 Instruction Manual download pdf (Page 12)

5. Align the two holes in the hinge (C) Fig. 19, with the

two holes in the cabinet door (D). MAKE SURE THAT

THE HINGE OPENING IS POINTING DOWN.

6. Insert #10-24x1/2" socket head cap screws through

the holes in the door, and thread the screws into the

holes in the hinge. NOTE: DO NOT COMPLETELY

TIGHTEN THE SCREWS AT THIS TIME.

7. Make sure the two hinges are aligned with each

other by using a straight edge as shown in Fig. 20.

8. Tighten the four screws securely.

Fig. 19

Fig. 20

11. Slide the two hinges (C) Fig. 22, on the door, over

the two hinge pins (A) on the cabinet.

Fig. 21

12. To open or shut the door, slide the latch away from

the cabinet and pull or push the door.

Fig. 22

9. Insert the door latch (F) Fig. 21, from the outside,

through the hole in the door.

10. Push down on the door latch to snap the latch in

place.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Delta 28-348 Instruction Manual Page 12