ACC-36E Manual
ACC-36E Layout & Pinouts 68
J1 Top: ADC1 through ADC4
J1 Top: D-sub DA-15F
Mating: D-sub DA-15M
The ±12V output can be used for an external device (i.e. sensor).
The drawn current should not exceed 0.5 Amperes.
The common ground (pin #7) is tied to the digital ground of the
UMAC rack.
J2 Top: ADC5 through ADC8
J2 Top: D-sub DA-15F
Mating: D-sub DA-15M
The ±12V output can be used for an external device (i.e. sensor).
The drawn current should not exceed 0.5 Amperes.
The common ground (pin #7) is tied to the digital ground of the
UMAC rack.
Comments to this Manuals