Delta 40-530 Specifications download pdf (Page 6)

Notes on installation

Foundation Install the units and components on a surface which is smooth, level and of

adequate load-bearing strength.

The base frames must be horizontal and the foundations must be smooth-topped

and horizontal.

Make sure that the bottom of the frame is in full-face contact with the supporting

surface: spot support is not permissible.

Permanently elastic inserts must be placed between supporting surface or

foundation and air-conditioning unit or, more accurately, base frame, in order to

prevent the operating noise of the air-conditioning unit carrying into the building as

structure-borne sound. By prefence, these inserts should be in the form of

insulating strips placed lengthways under the sectional frame members.

KG 40-250:

Insulating strips

(by others)

min. 200

Insulation

by others

Base frame

Strip foundation

Caution

KG/KGW 630-1000:

KGW 630-1000:

The units and components must be installed on a base frame or strip foundation.

Height to suit local snowfall, min. 200 mm.

X = width or length of unit, as appropriate - 20 mm

The base frames must be horizontal and the foundations must be smooth-topped

and horizontal.

Make sure that the bottom of the frame is in full-face contact with the supporting

surface: spot support is not permissible.

Permanently elastic inserts must be placed between supporting surface or

foundation and air-conditioning unit or, more accurately, base frame, in order to

prevent the operating noise of the air-conditioning unit carrying into the building as

structure-borne sound. By prefence, these inserts should be in the form of

insulating strips placed lengthways under the sectional frame members.

Wooden batten

Do not set down the unit on a flat surface, as this would damage the drip nose (see

drawing). Use wooden battens of adequate thickness as supports to avoid this

difficulty.

Insulating strips,

supplied by others

Base frame, delivered

in advance

Base frame,

installed

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments

Delta 40-530 Specifications Page 6

Comments to this Manuals

Related products and manuals for Circular saws Delta 40-530