Delta MS250 Operator's Manual download pdf (Page 14)

Operator's Manual

Connecting the Mixed Signal Option

Connecting to the Oscilloscope

To connect the Mixed Signal accessory to your oscilloscope:

1. Connect the Bus Cable to the Bus connector on the oscilloscope. Be sure the head is

turned so that the positioning wedge fits into the groove at the top of the connector.

Fasten the thumb screws.

2. Connect the USB 2.0 cable (attached to the Bus Cable) to any of the USB ports on the

oscilloscope.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

No comments

Delta MS250 Operator's Manual Page 14