Delta MS250 Operator's Manual download pdf (Page 19)

MS-250 Mixed Signal Oscilloscope Option

Minimum Voltage Swing (Hysteresis)

You can define the minimum high voltage and maximum low voltage levels using the

Hysteresis controls.

l Minimum high voltage may be set up to 1.4 V above the threshold.

l Maximum low voltage may be set up to 1.4 V below the threshold.

The minimum signal swing is 100 mV. The indeterminate range of 50 mV around the

threshold voltage level is the level below which the MS-500 will not operate. However, the

MS-250 can support a signal as low as 100 mV only if the input signal’s quality is

adequate.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

No comments

Delta MS250 Operator's Manual Page 19