Delta CL180CS Instruction Manual download pdf (Page 2)

Some dust created by power sanding, sawing, grinding, drilling,

and other construction activities contains chemicals known (to the

State of California) to cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

● lead from lead-based paints

● crystalline silica from bricks and cement and other masonry products

● arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, always wear MSHA/NIOSH

approved, properly fitting face mask or respirator when using such tools.

SAFETY GUIDELINES - DEFINITIONS

indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

indicates a potentially hazardous situation which, if not

avoided,could result in death or serious injury.

indicates a potentially hazardous situation which, if not

avoided,may result in minor or moderate injury.

used without the safety alert symbol indicates potentially

hazardous situation which, if not avoided, may result in

property damage.

This manual contains information that is important for you to know and under-

stand. This information relates to protecting YOUR SAFETY and PREVENTING

EQUIPMENT PROBLEMS. To help you recognize this information, we use the

symbols below. Please read the manual and pay attention to these sections.

Read and understand all instructions. Failure to fol-

low all instructions listed below, may result in electric shock, fire and/or

serious personal injury.

SAVE THESE INSTRUCTIONS.

GENERAL SAFETY RULES

WORK AREA

1. Keep your work area clean and well lit. Cluttered benches and dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a

power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

1. Do not abuse the cord. Never use the cord to carry the tool. Keep

cord away from heat, oil, sharp edges or moving parts. Replace damaged

cords immediately. Damaged cords increase the risk of electric shock.

2. A battery operated tool with integral batteries or a separate battery

pack must be recharged only with the specified charger for the battery.

A charger that may be suitable for one type of battery may create a risk of fire

when used with another battery.

3. Use battery operated tool only with specifically designated battery

pack. Use of any other batteries may create a risk of fire.

PERSONAL SAFETY

1. Stay alert, watch what you are doing, and use common sense when

operating a power tool. Do not use tool while tired or under the influence

of drugs, alcohol, or medication. A moment of inattention while operating

power tools may result in serious personal injury.

1 2 3 4 5 6 7 ... 16 17

Comments to this Manuals

No comments

Delta CL180CS Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Circular saws Delta CL180CS