Delta 1-1/2 H.P. DUST COLLECTOR 50-786 Instruction Manual download pdf (Page 7)

UNPACKINGANDCLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from

unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.

NOTICE

AVIS

AVISO

Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your

machine.

After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

ASSEMBLY

To reduce the risk of injury, turn unit off and disconnect it from power source before installing and

removing accessories, before adjusting or when making repairs. An accidental start-up can cause injury

ASSEMBLY TOOLS REQUIRED

Cross head screw driver (not supplied)

12 mm and other open-end or socket wrenches

(not supplied)

ASSEMBLING WHEELS TO BASE

CASTERS (FIG. 1, 2)

 

2. Insert caster stud into threaded hole in the base

—one shown at (D) — and tighten.

3. Tighten base of caster with wrench or needle-nose

pliers, as shown in Figure 2.

4. Repeat for other caster.

FIXED WHEELS (FIG. 3, 4)

          



         

mount bracket, through center hole (H) of wheel and

through other hole (I) in wheel mount bracket.

 

hex head bolt (F) and tighten.

NOTE: Do not overtighten lock nut (J) onto the bolt

(F). Be sure wheel is still free to rotate.

4. Repeat for other fixed wheel.

FIG. 1

FIG. 2

FIG. 3

FIG. 4

ASSEMBLY TIME ESTIMATE

Assembly for this machine takes approximately 1 hour.

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

No comments

Delta 1-1/2 H.P. DUST COLLECTOR 50-786 Instruction Manual Page 7