Delta 36-220 Service Manual download pdf (Page 6)

--- 3 ---

Maker

model

Max. cutting

dimension

Left bevel 45

Right/Left miter 45

Height x Width

(H x W)

HITACHI

C 10FC2

44 x 89

(1-3/4" x 3-1/2")

By turning the table to the right or left and inclining the saw

blade section (head) to the left, the Model C 10FC2 is

capable of compound cutting (bevel and miter, see Fig.4) of

workpieces with the maximum dimension shown in Table 4.

* When the saw blade section (head) is inclined 45 to the

left, the maximum possible angle setting of the table is

restricted to 45

to either the left or right.

Width (W)

Height (H)

Fig. 4

(Left)

(4) Compound cutting through use of miter and bevel cutting functions

Table 4

(Right or left)

(5) Equipped with debris guard to restrict dispersion of chips for enhanced safety in operation.

A debris guard has been adopted to prevent wood chips from adhering to the saw blade at the end of the

cutting operation. The debris guard tilts together with the saw blade during bevel cutting, thereby enhancing

safe operation.

(6) Lightweight design

14.5 kg in weight, for easy transport in a workshop

(Unit: mm)

1 2 3 4 5 6 7 8 9 10 11 ... 34 35

No comments

Delta 36-220 Service Manual Page 6