Delta MS250 Instruction Manual download pdf (Page 8)

Fig. 1

Remove the miter saw and all loose items from the carton.

Do not lift the miter saw by the switch handle. This action can cause misalignment. Always lift the machine

by the base or the carrying handle.

1. Miter Saw Arm

2. Miter Saw Base

3. Dust Bag

4. 1/2" Blade Wrench

5. 5mm Hex Wrench

6. Table Lock Handle

7. Bevel Pointer

8. M5x.8x10mm Pan Head Screw with an

M5.3 Flat Washer

ASSEMBLY

ASSEMBLY TOOLS REQUIRED

(Supplied)

* 5mm hex wrench

* 1/2” Blade wrench

(Not supplied)

* Phillips head screw driver

* A square to make adjustments

ASSEMBLY TIME ESTIMATE

Assembly time for this product will be about 30 minutes.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted

surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for

this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

CARTON CONTENTS

5 6 7

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

No comments

Delta MS250 Instruction Manual Page 8