Delta 31-140 Operations Instructions download pdf (Page 4)

14. Keep safety guards in place at all times when the

machine is in use. If removed for maintenance

purposes, use extreme caution and replace the

guards immediately when maintenance is complete.

15. Make sure the sander is firmly secured before use.

16. Check damaged parts. Before further use of the

machine, a guard or other part that is damaged

should be carefully checked to determine that it will

operate properly and perform its intended function.

Check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting and

any other conditions that may affect its operation.

A guard or other part that is damaged should be

properly repaired or replaced.

17. Provide for adequate space surrounding work area

and non-glare, overhead lighting.

18. Keep the floor around the machine clean and free of

scrap material, oil and grease.

19. Keep visitors a safe distance from the work area.

Keep children away.

20. Make your workshop child proof with padlocks,

master switches or by removing starter keys.

21. Give your work undivided attention. Looking

around, carrying on a conversation and “horse-

play” are careless acts that can result in serious

injury.

22. Maintain a balanced stance at all times so that you

do not fall or lean against the sanding disc or other

moving parts. Do not overreach or use excessive

force to perform any machine operation.

23. Use the right tool at the correct speed and feed

rate. Do not force a tool or attachment to do a job

for which it was not designed. The right tool will do

the job better and safer.

24. Use recommended accessories; improper

accessories may be hazardous.

25. Maintain machinery with care. Follow instructions

for lubricating and changing accessories.

26. Turn off the machine before cleaning. Use a brush

or compressed air to remove dust or debris — do

not use your hands.

27. Do not stand on the machine. Serious injury could

occur if the machine tips over.

28. Never leave the machine running unattended. Turn

the power off and do not leave the machine until it

comes to a complete stop.

29. At all times hold the stock firmly.

30. Do not use this sander for other than it intended

use. If used for other purposes, DELTA® Power

Equipment Corporation. disclaims any real or

implied warranty and holds itself harmless for any

injury or damage which may result from that use.

Familiarize yourself with the following safety notices

used in this manual:

This means that if precautions are not heeded, it may

result in minor injury and/or possible machine damage.

This means that if precautions are not heeded, it may

result in serious injury or possibly even death.

SAVE THESE INSTRUCTIONS.

Refer to them often and use them to instruct others.

1 2 3 4 5 6 7 8 9 ... 39 40

Comments to this Manuals

No comments

Delta 31-140 Operations Instructions Page 4

Comments to this Manuals

Related products and manuals for Power sanders Delta 31-140