Delta 11-950 Instruction Manual download pdf (Page 5)

CLEANING

Remove the protective coating from the machined surfaces of the drill press and all loose items.

This coating may be removed with a soft cloth moistened with kerosene. DO NOT use acetone,

gasoline, or lacquer thinner for this purpose.

ASSEMBLING THE DRILL PRESS

Fig. 4

Fig. 5

Fig. 3

1. Assemble the column (A) Fig. 3, to drill press base (B)

as shown, using the three 20mm (3/4" long) hex head

cap screws (C).

2. Assemble the table (D) Fig. 4, to drill press column

(A) as shown.

3. Thread clamp handle (E) Fig. 5, into holes in rear of

table bracket as shown. Align table (D) to base (B) and

tighten clamp handle (E).

1 2 3 4 5 6 7 8 9 10 ... 13 14

No comments

Delta 11-950 Instruction Manual Page 5