Delta 23-700 Instruction Manual download pdf (Page 12)

TROUBLESHOOTING

For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call

the DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).

The 10" aluminum oxide grinding wheel operates at a slow

speed of 70 RPM. This speed is suitable for

honing garden tools, or sharpening chisels, and axes (Fig.

21).

During operation, keep the water level in the reservoir (A)

Fig. 26 at a 1" depth. This level will keep the wheel

constantly wet and keep hardened tools cool without

damaging their temper. The large wheel also is used to

remove burrs from tools requiring keen edges.

The sliding angle jig is used to sharpen tools with

compound cutting angles (Fig. 22).

Adjust the tool rest so that it supports the tool at the

exact grinding angle close to the grinding wheel.

Observe all safety precautions before applying power to

the machine.

10" WET GRINDING WHEEL

Fig. 21

Fig. 22

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Delta 23-700 Instruction Manual Page 12