Delta 36-070 Instruction Manual download pdf (Page 4)

UNPACKING

1. Remove the miter saw and all loose items from the

carton. IMPORTANT: DO NOT LIFT THE MITER SAW

BY THE SWITCH HANDLE AS THIS MAY CAUSE MIS-

ALIGNMENT. ALWAYS LIFT THE MACHINE BY THE

BASE OR CARRYING HANDLE. Fig. 2, illustrates the

machine and all loose items after they have been

removed from the carton.

1 - Miter Saw

2 - Wrenches for changing the blade

3 - Table lock handle

ASSEMBLY INSTRUCTIONS

WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MITER SAW TO THE POWER SOURCE UNTIL

THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDERSTOOD THE ENTIRE OWNERS

MANUAL.

MOVING CUTTERHEAD

TO THE UP POSITION

1. Push down on switch handle (A) Fig. 3, and pull out

cuttinghead lockpin (B).

2. The cuttinghead (C) can then be moved to the up

position, as shown in Fig. 4.

Fig. 2

Fig. 3

Fig. 4

1 2 3 4 5 6 7 8 9 ... 20 21

No comments

Delta 36-070 Instruction Manual Page 4