Delta 37-070 Instruction Manual download pdf (Page 10)

Fig. 13

Fig. 14

Fig. 15

Fig. 16

ASSEMBLING

CUTTERHEAD GUARD

1. Thread the two 7/16" long socket button head

screws (A) Fig. 13, into the two threaded holes in front

side of jointer base. DO NOT COMPLETELY TIGHTEN

SCREWS (A) AT THIS TIME.

2. Assemble guard mounting bracket (B) Fig. 14, to the

two screws (A) as shown, and tighten the two screws (A).

ASSEMBLING

CUTTERHEAD LOCK

1. Assemble cutterhead lock (A) Fig. 15, to the front

side of the jointer base, using the 7/16" long socket

button head screw (B). NOTE: THE CUTTERHEAD

LOCK (A) IS TO BE ENGAGED WITH THE

CUTTERHEAD SHAFT AS SHOWN IN FIG. 15. ONLY

WHEN SETTING KNIVES. ALL OTHER TIMES THE

CUTTERHEAD LOCK (A) SHOULD BE DISENGAGED

FROM THE CUTTERHEAD, AS SHOWN IN FIG. 16.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

No comments

Delta 37-070 Instruction Manual Page 10