Delta 50-770 Instruction Manual download pdf (Page 8)

ASSEMBLING

VACUUM HOSE TO

DUST COLLECTOR

1. Place the intake cap holder (D) on the dust collector

as shown in Fig. 15. NOTE: DO NOT COVER THE

INTAKE PORT WITH THE INTAKE CAP WHEN

ATTACHING THE HOSE TO THE INTAKE PORT.

2. Place hose clamp (A) Fig. 15, onto one end of

vacuum hose (B) and slide hose around intake port (C)

as shown in Fig. 16. Tighten hose clamp (A).

8. Place lower support tube (B) Fig. 14, onto intake

funnel assembly (A) and secure with tube clamp (C).

Fig. 14

Fig. 15

Fig. 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Delta 50-770 Instruction Manual Page 8